Scholarly output

A review on high entropy alloys as metallic biomaterials: fabrication, properties, applications, challenges, and future prospects

J. Adhikari, P. Saha, P. Mandal, S. K. Sinha, A. H. Seikh, J. A. Mohammed, M. Ghosh

A strategy for microstructural and texture optimization in high-performance AA 2195 Al-Cu-Li alloy through cryogenic processing

A. K. Mahanta, S. Das, A. Ghosh, M. Ghosh

Investigation of mechanical and tribological behaviour of SiC- and carbon nanotube-reinforced aluminium matrix hybrid nanocomposites

A. Chatterjee, S. Sinha, P. Das, S. Paul, A. Ghosh, M. Ghosh

Insight into the corrosion behaviour of friction stir welded joints: a comparison between 6061-T6 and 7075-T651 aluminium alloy joints in aerated NaCl

B. Ghosh, R. Jain, S. K. Ghosh, M. Ghosh

The effect of B2 phase on dynamic microstructural evolution during hot deformation of an Al-containing high-entropy superalloy

A. Ghasemi, A. R. Eivani, S. M. Abbasi, A. Ghosh, S. K. Singh, M. Ghosh, H. R. Jafarian

Synergistic influence of processing temperature and TiB2 content on the thermo-mechanical behaviour of copper matrix composites

U. K. Murmu, S. Yadav, S. Sen, K. Das, S. Trivedi, A. Ghosh, S. Pal, M. Ghosh

Deformation behaviour study of single crystal BaPt2 compound using parameterized embedded-atom method potential — Part 1: Tensile and creep characteristics

S. Mukhopadhyay, S. K. Dinda, S. K. Singh, M. Ghosh, S. Pal

Deformation behaviour study of single crystal BaPt2 compound using parameterized embedded-atom method potential — Part 2: Ratcheting characteristics

S. Mukhopadhyay, S. K. Dinda, S. K. Singh, M. Ghosh, S. Pal

Influence of alloying elements and annealing temperature on Lankford constant of high strength dual phase steels using supervised regression models

A. Pal, R. Verma, P. Mandal, S. Sinha, P. Das, S. Pal, M. Ghosh

Enhancing wear resistance and mechanical properties of TiB2-reinforced AZ91D magnesium alloys

K. Athili, A. K. Birru, S. Sinha, R. S. Buradagunta, P. K. Bannaravuri, M. Ghosh

Machine learning for predicting high-temperature strength of austenitic stainless steels based on composition and deformation parameters

A. Ghasemi, A. R. Eivani, O. Banapour Ghaffari, M. Zakeri Nasrabadi, M. Ghosh

Controlling dynamic recrystallization via hot compression: defining the optimal processing window for stable, isotropic Zn-1.2Mg bio-implants

M. Moradi, A. R. Eivani, S. H. Seyedein, M. Ghosh, H. Vafaeenezhad

Bilayer electrospun amine modified regenerated cellulose-collagen/functionalized bioactive glass-ceramic scaffold for potential bone tissue engineering applications

J. Adhikari, S. Dasgupta, P. Das, S. Dey, A. D. Rajora, A. Barui, P. Basak, M. Ghosh, P. Saha

Optimising the tensile properties of Al10Co25Cr8Fe15Ni36Ti6 high entropy superalloy

A. Ghasemi, A. R. Eivani, S. M. Abbasi, M. Ghosh, H. R. Jafarian

Influence of reinforcement and processing temperature on the microstructure and texture evolution of Cu–TiB2 composite processed by equal channel angular pressing

U. K. Murmu, P. Saha, A. Ghosh, S. Yadav, B. Ravisankar, A. H. Seikh, I. A. Alnaser, M. Ghosh

Effects of TiB2 nanoparticles on the microstructure and mechanical properties of AZ91D magnesium alloy processed through stir casting technique

K. Athili, A. K. Birru, M. Ghosh, S. Roy

Development of a next-generation high-strength Al–Zn–Mg–Cu alloy microalloyed with Ag and Sn through equal channel angular pressing

A. Ghosh, M. Ghosh

Developing new high-entropy alloys with enhanced hardness using a hybrid machine learning approach: integrating interpretability and NSGA-II optimization

D. Dey, A. Pal, P. Biyani, P. Mandal, S. Pal, S. Das, S. Dey, M. Ghosh

Al-Co-Cr-Fe-Ni-Ti high entropy alloys: a review of microstructural and mechanical properties at elevated temperatures

A. Ghasemi, A. R. Eivani, S. M. Abbasi, H. R. Jafarian, M. Ghosh, S. H. Mousavi Anijdan

Optimising properties of cold sprayed CuAlFeB powder on EN AW 7075 substrate for corrosion and wear resistance applications

S. Hembram, N. M. Chavan, A. Roy, S. Kumar, A. Majumdar, M. Ghosh

Investigation of the role of non-octahedral slip planes in tensile deformation behaviour of naturally aged aluminium 6061 alloy

S. Sen, A. Ghosh, A. Ghosh, G. Shankar, A. F. Abd El-Rehim, M. Ghosh

Improved machine learning framework for prediction of phase and crystal structure of high-entropy alloys

D. Dey, S. Das, A. Pal, S. Dey, C. K. Raul, P. Mandal, A. Chatterjee, S. Chatterjee, M. Ghosh

A voting-based ensemble classifier to predict phases and crystal structures of high entropy alloys through thermodynamic, electronic, and configurational parameters

P. Mandal, A. Choudhury, A. Basu Mallick, M. Ghosh

Utilizing machine learning algorithms to predict accuracy of the Index of Relative Tectonic Activity (IRTA), Dhansiri (North) River Basin in India and Bhutan

S. Roy, P. Mandal, A. Chowdhury, M. Abdullah-Al-Wadud, A. H. Seikh, M. Ghosh, A. Mukhopadhyay

Bilayer regenerated cellulose/quaternized chitosan-hyaluronic acid/collagen electrospun scaffold for potential wound healing applications

J. Adhikari, S. Dasgupta, P. Das, D. A. Gouripriya, A. Barui, P. Basak, M. Ghosh, P. Saha

Design and analysis of automotive vehicle components with composite materials using ANSYS

S. Paul, P. Roy, A. Chatterjee, P. Pandit, R. Mukherjee, M. Ghosh

A new insight into the phase stability in high entropy alloys

S. S. Basu, P. P. Jana, M. Ghosh

Modelling of thermal behaviour in niobium during electron beam welding

V. Jain, K. Das, A. Chaudhuri, M. Manna, S. Pal, M. Ghosh

Establishing the root cause of a failure in condenser tubes in a power plant

S. Sen, A. Bahrami, M. Ghosh, H. Fallah-Arani, M. Mahdizadeh

Collagen-incorporated functionalized bacterial cellulose composite: a macromolecular approach for successful tissue engineering applications

J. Adhikari, S. Dasgupta, A. Barui, M. Ghosh, P. Saha

In pursuit of a suitable machine learning algorithm for hardness prediction of aluminium alloy

S. Chhabri, K. Hazra, A. Choudhury, A. Sinha, M. Ghosh

Heat checking as a failure mechanism of dies exposed to thermal cycles: a review

P. Solgi, M. Chenarani, A. R. Eivani, M. Ghosh, V. Kumar, H. R. Jafarian

Exploring possibilities for fabricating Cu–TiB2 composite through different powder metallurgy routes

U. K. Murmu, S. Sahu, A. Ghosh, M. Ghosh

Phase stability, microstructure, and mechanical properties of spark plasma sintered nanocrystalline boron-doped AlCoFeMnNi high-entropy alloy

S. Pourmohammadi, A. Mohammadnejad, A. Bahrami, S. H. Mousavi Anijdan, N. Park, M. Ghosh

Service life assessment of yttria stabilized zirconia (YSZ) based thermal barrier coating through wear behaviour

P. Banerjee, A. Roy, S. Sen, A. Ghosh, G. Saha, A. H. Seikh, I. A. Alnaser, M. Ghosh

Stress relaxation cracking failure in heat exchanger connection pipes in a petrochemical plant

R. K. Mallick, M. Ghosh, A. Bahrami, V. Esmaeili

Effect of annealing on microstructure and mechanical properties of accumulative roll bonded Fe-24Ni-0.2C TRIP steel

H. Mohammadi, H. R. Jafarian, S. Sen, M. Ghosh, A. R. Eivani

Development of mechanical properties and microstructure for Al–Zn–Mg–Cu alloys through ECAP after optimizing the outer corner angles through FE modelling

A. Ghosh, K. Das, A. R. Eivani, H. Mohammadi, H. Vafaeenezhad, U. K. Murmu, H. R. Jafarian, M. Ghosh

Microstructural analysis and corrosion behavior of a titanium cenosphere composite foam fabricated by powder metallurgy route

D. Dutta Majumdar, S. Sahu, D. P. Mondal, A. Roychowdhury, A. K. Jha, M. Ghosh

Functionalized mesoporous SiO2-CaO-Na2O-P2O5-based nanometric glass-ceramic particles with enhanced dispersibility and bioactivity

J. Adhikari, S. Dasgupta, A. Barui, M. Ghosh, P. Saha

Fabrication and characterization of SiC-reinforced aluminium matrix composite for brake pad applications

A. Chatterjee, S. Sen, S. Paul, P. Roy, A. H. Seikh, I. A. Alnaser, K. Das, G. Sutradhar, M. Ghosh

Evolution of dynamic recrystallization behavior and simulation of isothermal compression of Zn-22Al alloy

H. Mohammadi, A. R. Eivani, S. H. Seyedein, M. Ghosh, H. R. Jafarian

Simulation of deformation and dynamic recrystallization during isothermal compression of Zn-22Al alloy

H. Mohammadi, A. R. Eivani, S. H. Seyedein, M. Ghosh, H. R. Jafarian

Temperature-assisted microstructure development for TiB2 reinforced Cu matrix composite

U. K. Murmu, A. Ghosh, M. Ghosh

A review on metallurgical features of hot-dip aluminized steel

P. P. Dey, S. Sahu, P. S. Banerjee, M. Ghosh

An investigation of microstructural evolution and flow instability during hot deformation of biodegradable Zn-1.2Mg

M. Moradi, A. R. Eivani, S. H. Seyedein, M. Ghosh, H. R. Jafarian

The effect of multi-pass friction stir processing on microstructure, mechanical properties, and corrosion behaviour of WE43-nHA bio-composite

A. R. Eivani, M. Mehdizade, M. Ghosh, H. R. Jafarian

Investigation on the effects of pretreatment on the surface characteristics of duplex plasma-treated AISI P20 tool steel

K. Das, S. Sen, A. Joseph, A. Ghosh, K. Biswas, S. Mukherjee, M. Ghosh

Low speed laser beam welding (LBW) of 6061-T6 alloys using a 300 W pulsed Nd:YAG laser: microstructure development and crack formation

B. Ghosh, S. Mondal, S. Chandra, J. D. Majumdar, M. Ghosh

Effects of surface patterning and topography on the cellular functions of tissue engineered scaffolds with special reference to 3D bioprinting

J. Adhikari, A. Roy, A. Chanda, D. A. Gouripriya, S. Thomas, M. Ghosh, J. Kim, P. Saha

Effect of pre-treatment and duration of pulse plasma nitriding on duplex plasma treatment by physical vapour deposition of TiN on AISI D2 steel

K. Das, A. Joseph, A. Ghosh, G. Saha, R. Rane, S. Mukherjee, M. Ghosh

Mechanical alloying of ball-milled Cu-Ti-B elemental powder with the in-situ formation of titanium diboride

M. Ghosh, U. K. Murmu, A. Ghosh, A. H. Seikh, I. A. Alnaser, H. S. Abdo, N. S. Alowaysi

Fabrication and characterisation of silicon carbide and graphite reinforced aluminium matrix composite

A. Chatterjee, S. Sen, S. Paul, K. Ghosh, M. Ghosh, G. Sutradhar

Evaluating the performance of sputter-deposited aluminium alloy-based coatings on steel in the light of grain orientation, surface roughness, and corrosion behaviour

U. K. Murmu, A. Roy, A. Ghosh, A. R. Eivani, M. Dutta, M. Ghosh

Application of SiC and graphite reinforced aluminium metal matrix composite in braking systems and its validation through finite element analysis

M. Ghosh, A. Chatterjee, S. Sen, S. Paul, K. Ghosh, G. Sutradhar

Influence of tool rotational speed on the evolution of microstructure and mechanical properties of precipitation-hardened aluminium 6061 butt joint during friction stir welding

B. Ghosh, H. Das, A. Samanta, J. Dutta Majumdar, M. Ghosh

Phase prediction in high entropy alloys by various machine learning modules using thermodynamic and configurational parameters

P. Mandal, A. Choudhury, A. Basu Mallick, M. Ghosh

Influence of deposition time and surface roughness on microstructure and corrosion behavior of sputter-deposited pure Al coating on 4130 chromalloy steel

U. K. Murmu, A. Ghosh, M. Dutta, M. Ghosh

Microstructure and mechanical properties of Al/Cup/SiCp/TiCp-based hybrid composites fabricated by spark plasma sintering

S. Saha, M. Ghosh, A. K. Pramanick, C. Mondal, J. Maity

Optimization of electrical process parameters of WEDM on ECAP Al7075 alloys considering radial overcut (ROC) as output response

M. Ghosh, N. G. Roy, D. Mondal, P. P. Dey

Polycaprolactone-assisted electrospinning of honey/betel with chitosan for tissue engineering

J. Adhikari, M. Ghosh, P. Das, P. Basak, P. Saha

A study on the phase formation and physical characteristics of hot-dip aluminized coating at 750°C

P. P. Dey, P. Modak, D. Chakrabarti, P. S. Banerjee, M. Ghosh

Attainment of high specific hardness and specific modulus in spark plasma sintered aluminum-copper-silicon carbide-titanium carbide hybrid composite

S. Saha, M. Ghosh, A. Pramanick, C. Mondal, J. Maity

Effects of annealing temperature on microstructure and mechanical behavior of conventionally and severely deformed Fe-24Ni steel by accumulative roll bonding

M. Howeyze, A. R. Eivani, M. Ghosh, H. R. Jafarian

Effect of beam current on the microstructure, crystallographic texture and mechanical properties of electron beam welded high purity niobium

K. Das, A. Ghosh, A. Bhattacharya, H. Lanjewar, J. D. Majumdar, M. Ghosh

An investigation of hot deformation behavior of Zn-22Al alloy and development of its processing maps during isothermal compression

H. Mohammadi, A. R. Eivani, S. H. Seyedein, M. Ghosh, H. R. Jafarian

Effects of processing parameters of 3D bioprinting on the cellular activity of bioinks

J. Adhikari, A. Roy, A. Das, M. Ghosh, S. Thomas, A. Sinha, J. Kim, P. Saha

3D FEM simulation of Al-Zn-Mg-Cu alloy during multi-pass ECAP with varying processing routes

A. Ghosh, M. Ghosh

Comparing methods for computing the electrical superconducting property with the microstructure of electron beam welded high purity niobium

K. Das, P. Mandal, M. Ghosh

Atmospheric plasma irradiation for surface modification of Cu-TiC thin film

A. Roy, N. Ghosh, M. Ghosh, S. Chandra Das, A. Majumdar

Influence of temperature on microstructure, crystallographic texture and mechanical properties of EN AW 6016 alloy during plane strain compression

A. Ghosh, A. Roy, A. Ghosh, M. Ghosh

Experimental study and modelling of the role of solutes, precipitates and temperature on the work-hardening of AA6xxx aluminium alloys

M. Ghosh, A. Miroux, L. Kestens

Modified Monte Carlo approach for simulation of grain growth and Ostwald ripening in two-phase Zn–22Al alloy

H. Mohammadi, A. R. Eivani, S. H. Seyedein, M. Ghosh

Parametric optimization of WEDM for EN AW 7075 alloy processed by ECAP

N. G. Roy, A. Ghosh, P. P. Dey, M. Ghosh

Effect of heat treatment and severe plastic deformation on microstructure and texture evolution of 7075 alloy

A. Ghosh, M. Ghosh

In vivo analysis of bone-tissue interface in medical grade titanium and porous titanium with and without cenosphere as space holder

D. Dutta Majumdar, V. Kumar, A. Roychowdhury, D. P. Mondal, M. Ghosh, S. K. Nandi

Studies on the characterization and morphological features of the coating on interstitial free steel dipped in molten Al-Si-Mg alloy at 800°C

P. P. Dey, P. Modak, P. S. Banerjee, D. Chakrabarti, A. H. Seikh, H. S. Abdo, M. Luqman, M. Ghosh

Carbon impact on surface morphology and electrical properties of Cu-TiC thin film

A. Roy, S. Hembram, M. Ghosh, A. Majumdar

Investigation of phase evolution of Al–Si–Mg coating on hot-dipped interstitial-free steel

P. P. Dey, P. Modak, A. Ghosh, D. Chakrabarti, P. S. Banerjee, M. Ghosh

Revealing substructure through SEM-based gallium enhanced microscopy for EN AW-6016 alloy

S. Sharma, G. Saha, M. Ghosh

Development of ultrafine-grained Al-Zn-Mg-Cu alloy by equal channel angular pressing: microstructure, texture and mechanical properties

A. Ghosh, M. Ghosh, K. Gudimetla, R. Kalsar, L. Kestens, C. Kondaveeti, S. Pugazhendhi, B. Ravisankar

Phase transformation and dispersoid evolution for Al–Zn-Mg-Cu alloy containing Sn during homogenization

A. Ghosh, M. Ghosh, A. H. Seikh, N. H. Alharthi

Fretting wear resistance of titanium foam developed by powder metallurgy route

D. D. Majumdar, M. Ghosh, D. P. Mondal, A. Roychoudhury

Influence of homogenisation time on evolution of eutectic phases, dispersoid behaviour and crystallographic texture for Al–Zn–Mg–Cu–Ag alloy

A. Ghosh, M. Ghosh, R. Kalsar

Ageing behaviour of Sc-doped Cu–Zn–Al shape memory alloys

G. Saha, M. Ghosh, A. Antony, K. Biswas

Corrosion characteristics of copper-added austempered gray cast iron (AGCI)

A. H. Seikh, A. Sarkar, S. M. A. Khan Mohammed, N. Alharthi, M. Ghosh

Wear behavior of cenosphere-dispersed titanium composite foam developed by powder metallurgy route

D. Dutta Majumdar, D. P. Mondal, A. Roychowdhury, M. Ghosh

Tensile and impact behaviour of thermo-mechanically treated and micro-alloyed medium carbon steel bar

A. Ghosh, M. Ghosh

Microstructure and texture development of 7075 alloy during homogenisation

A. Ghosh, M. Ghosh

On the role of precipitates in controlling microstructure and mechanical properties of Ag and Sn-added 7075 alloys during artificial ageing

A. Ghosh, M. Ghosh, G. Shankar

Polysaccharides from Dolichos biflorus Linn and Trachyspermum ammi Linn seeds: isolation, characterization and remarkable antimicrobial activity

S. Basu, M. Ghosh, R. K. Bhunia, J. Ganguly, B. K. Banik

Influence of pretreatment on surface behavior of duplex plasma treated AISI H13 tool steel

K. Das, J. Alphonsa, M. Ghosh, J. Ghanshyam, R. Rane

Effect of ZnO coating on two different sized α-Fe nanoparticles: synthesis and detailed investigation of their structural, optical, hyperfine and magnetic characteristics

A. K. Rathore, S. P. Pati, M. Ghosh, A. Roychowdhury, D. Das

HVOF sprayed WC-CoCr coating on mild steel: microstructure and wear evaluation

D. Naha, M. Ghosh, S. Chatterjee, J. Dutta Majumdar, A. Majumdar

Microstructure and wear behavior of pulsed plasma nitrided AISI H13 tool steel

K. Das, A. Joseph, M. Ghosh, S. Mukherjee

Correlating r-value and through thickness texture in Al–Mg–Si alloy sheets

M. Ghosh, A. Miroux, L. A. I. Kestens

Structural, optical, hyperfine and magnetization studies of ZnO encapsulated α-Fe nanoparticles

A. K. Rathore, M. Ghosh, S. P. Pati, A. Roychowdhury, D. Das

Examining energy and environment issues in non-ferrous metallurgy in the light of industrial metabolism

M. Ghosh, P. S. Banerjee, H. S. Ray

Warm deep-drawing and post drawing analysis of two Al-Mg-Si alloys

M. Ghosh, A. Miroux, R. J. Werkhoven, P. J. Bolt, L. A. I. Kestens

Environmental pollution due to gaseous emissions during non-ferrous extraction processes

M. Ghosh, P. S. Banerjee, H. S. Ray

Microstructure-texture-fracture toughness property correlation in annealed Al-6Mg alloy with minor scandium and zirconium additions

M. Ghosh, R. Sen, S. Kaiser